Acrylic supplies due to its outstanding performance unique physical advantage, so it can be widely used in our daily lives, such as daily life, many appliance applications products are made of acrylic supplies. But now, with the rapid development of the growing market demand and the science and technology, improve acrylic screen technology will become one of the primary areas of acrylic products plant should go explore, and when it comes to this small part I think Suzhou acrylic merchants articulated views on these very worthy of our reference practice in this ad portal Xiaobian I gave you a summary of Suzhou acrylic on acrylic screen printing business process improvement point of view some of the views, the following is my summary everyone together with reference details about it.

　　Suzhou Acrylic its business-to-acrylic silkscreen process improvement ideas main points of view are the following:

　　1, the basic requirements for perfect image reproduction quality transparent film of positive-some better, that is the network edge for a neat and opaque. Color separations and printing ink used to use the same color.

　　2, the squeegee is also crucial for high- quality printing, knives Shore hardness of about seventy. Squeegee transferred to the 75-degree angle, if squeegee angle adjustment was peaceful, the printed image will be blurred, if adjusted too steep an angle, the risk of distortion of the image on the big screen printing.

　　3, the positive- negative on plexiglass products above, then the exposure will be good stretch on the screen and the image positive-negative and parallel to the axis. If moire phenomenon occurs, can the left or right screen, until no moire, usually 7 degrees can be. Region most likely to form Moire is located on the screen in the direction of the position of intersection of the screen. Main color and the darker the color will cause moire problems.

　　4, four- color printing, you must use the same size and stability of the screen frame, the frame must be used for the same type and model of stretched mesh. Use stain the screen can help eliminate moire, screen tension must be uniform throughout the same, and four-color printing of four network version of the stretching tension to be the same.

　　5, halftone images use high viscosity of the ink, the finer the screen requires more intense color inks.

　　6, when using UV ink, tonal range halftone positive image should be chosen 5-80%, squeegee Shore hardness of seventy-five. To prevent plexiglass processing UV ink does not rub dirty when color overprint, recommended by the CMYK printing color sequence. And stencil thickness of no more than 5um.

　　7, back to the blade should not be put too low, they are liable to full excess ink on the film version, print blurring or smearing prone.

　　These are some of the views Suzhou acrylic acrylic silk business process improvement point of view, I hope the business insight these views can be valuable for the reader, such as reader want to know more detailed information related to Suzhou advertising material, please continue to focus on this web site advertising material procurement thematic channels.