Acrylic light boxes production process complex and cumbersome process requires technology must be in place. The current cost is cheaper acrylic light boxes, body chary, prominent advertising theme, eye-catching bright colors, varied, there is no time limit, its aging well, so by the customer favorite. Here is small as we finishing acrylic light boxes production process, take a look.

　　(1) acrylic light boxes production materials:

　　Keel: wood or angle iron or aluminum profiles production.

　　Source: fluorescent tube sets.

　　Panel: plexiglass or PVC Swatches palette.

　　Bracket: Triangle hob.

　　(2) acrylic light boxes commonly used tools: electric drill, Phillips screwdriver, screws, hacksaw, shovel hammer, pliers, small nails, latex, hook knife, a wire saw, plexiglass glue.

　　(3) acrylic light boxes production operation process elements:

　　Design: Gu amount required to change design requirements to develop a good portfolio of sizes, colors, fonts, graphic arrangement of primary and secondary, if they display. Also depends on the installation site developed bracket. Design-based computing each word size, font, color, conduct search words.

　　Keel: generally hexahedral. Material: 20 × 20 or 30 × 30.

　　Jiaotie: Conditional own processing, the processing unconditionally.

　　Wood: with 2 × 2 cm square were nailed wooden frame.

　　Cutting: the length and width of each four, length, width dimensions are minus 0.5 cm = timber length. Tenon saw two 2 × 1, the cast of white latex paste then nailed. Thickness of minus two material thickness + 0.5 = thickness length. Then cast white latex nailed with nails.

　　Aluminum material: aluminum material cabinet space, height, width and length dimensions remain unchanged. Sawed into 45-degree angle, coupled with the plug-ins.

　　Andon: general use fluorescent tubes two, three. 40W1.2 meter- long tube, with a 1.3 m or more boxes. 30W tube 0.9 meters long, 1.1 meters above the box with. 20-25 cm in thickness.

　　So with the customer to negotiate, we must consider organic board (specification is 1830 × 1200mm) material savings problem, consider the fluorescent tube length question.

　　When installed, the ends of the tube holder mounting screw cap, do not fire, the ballast will be placed in the next, do not fire the best test fired after taped. Power line by the ballast circuit connected, with a thick wire with a little wood-frame by fluorescent lamp ballasts in 0.7mm and 0.8mm schematic traces.

　　Board: white with mostly sub- Rubai, magnetic and white plexiglass plate. Usually love magnetic whiteboard: one white magnetic board, white face: two small print with the remaining material can be processed, or creamy white paste with fragmentation, anti-red background of red, blue background anti Portland, benzene board word can be done, can see traces of glue printing ??? Lightbox hook knife cutting board with a good, small wooden frame length and width dimensions than 2-3mm.

　　On board: nail small nails (15mm), the first electric drill with a small eye, otherwise hard to love split nail, nailed to the edge 5mm, more than one meter long nail three or four can be. 20mm wide side only four nails to nail. Drilling in the side of the wire to wear out.

　　Aluminum: with 20 × 20mm aluminum angle, length width than Shanghao plexiglass plate to face large out of 2mm. Aluminium angle head angle of 45 degrees saw, screws were nailed to the side of the 20mm thick front include regular script. People can not see the nail.

　　Paste organic character: according to the design of the text is arranged on a grid marked boxes gently to straighten the word, and then use plexiglass glue to paste, paste in two ways, one is stuck on an organic glue droplets, another with medical syringes, suction organic glue and gently inject the edge. The second one better than the first. Check whether the typo, lost word against the word of checking whether each word cement, there is no missing.

　　Clean: with a clean piece of cloth, moistened with water, then squeeze toothpaste all rub, rub after all, and then a cloth dampened in a little water, rub a large area of ??water more difficult, wet cloth can be.

　　Installation sequence:

　　Stent design - cutting - welding press - Fixed - installation boxes

　　Acrylic light boxes above is about the introduction of the production process, we want to help. Read more about the production of acrylic light boxes other knowledge, please continue to focus our advertising sale of network advertising production services channels.